In addition to being reliable and affordable, the FX-9 was designed to be completely modular. Outfit it with any Freedom Ordnance barrel length and customize it with a nearly endless amount of AR-15 accessories. Also, you can create just about any configuration you need for your next mission. Made in the USA, this is freedom to the extreme.
SPECS
- OPERATING SYSTEM Blowback
- CALIBER 9mm (9×19)
- MAG TYPE Glock® type
- AMMUNITION 9mm 115 gr. FMJ recommended/select hollow points. We recommend starting with with the following ammunition: 115 gr. FMJ Tulammo®, 115 gr. FMJ MAGTECH®, 115 gr. FMJ Wolf®, 124 gr. JHP SIG SAUER® Elite Performance, PMC® Bronze, 115 gr. American Eagle®, 115 gr. Federal®, 115 gr. Remington®. The FX-9 upholds Xtreme reliability with a wide range of ammo including many hollow point designs for self defense and full metal jacket. We do not recommend the use of non jacketed ammunition as unprotected lead can cause fouling and buildups that plated and jacketed bullets do not. Do not use aluminum case ammunition in your FX-9!!
- LENGTH 4 inch 19″ 8 inch 22.5″ 10 inch 24.5″ 16 inch 32.25″ 18 inch 34.25
- WEIGHT 4 inch 4.45 lbs. 8 inch 5.2 lbs. 16 inch 6.1 lbs.
- MATERIAL The FX-9 is machined from billet material, anodized type III aluminum components. Steel components are full hard nitride and black nitrided including the barrel, bolt, ejector, last round hold open, feed ramp and extractor for extended wear properties and corrosion resistance.
- WARRANTY Limited Lifetime Warranty Using aluminum casing, remanufactured, reloads or lead projectiles could void your warranty. Also, It does not include cosmetics, or issues that may result in changing out the fire control, buffer, buffer spring, or normal wear parts (ex. firing pin spring).
- IMPORTANT Operation The FX-9 Pistol is designed for right handed use. We advise left handed shooters to consider this before purchase, as some features may not be well suited to all left handed shooters. Trigger We do not recommend using aftermarket lighter weight triggers, if you wish to try an aftermarket trigger group we recommend keeping your factory supplied trigger group nearby for re-installation as it has more disconnector engagement built into it than a normal mil spec trigger group or after market trigger group. Buffer Tube The 16″ and 18″ FX-9 carbine come standard with a mil-spec buffer tube. The buffer tube that comes on the 4″, 8″ and 10″ pistol is proprietary to the KAK Shockwave Blade brace. All FX-9 models lower receivers are threaded to receive mil-spec buffer tubes. Upper A JP Enterprise silent buffer system will damage the FX-9 upper.
